Introducing EXILE Rig #1

Exile Rig #1 is a fast self-moving 5 load rig that is built to be diverse in its application.

Exile #1 is capable of drilling presets, mainhole ( Class 1BOP/Class 2BOP), and coring (conventional and wireline) - all with range 3 pipe.

The rig was designed to be a carrier mounted conventional drilling rig that is self moving and quick to rig up (average rig up and rig out time is 2hrs per well).

Our company is focused on drilling wells with a hands on approach. Our goal is performance. Exile Rig #1 was designed with performance in mind and is by far the best rig in its class.

Exile Drilling is confident that by using our company, people and equipment we will increase productivity and save all our clients time and money.

	Exile Rig #1 – 2006 Peterbilt 475CAT Tandem Steer Tri-Drive Depth Rating: -750m w/ 12 ¼” holesize -1500m w/ 6 ½” hole size Drawworks: Conventional Brewster PH14 w/ 4 line split travelling blocks
Derrick rated for 56000daN Mast: 19.5m – Mast w/ crown: 20.4m Mast from ground elevation: 22.9m
	Pipe Arm: 3700Kg rating / Range 3 Casing - 2 3/8” to 13 5/8” Casing Handling (regulated jaw pressure) Pipe: 8 – 6.5”(XH) DC; 8 – 4.75”(3.5IF) DC; 10 – 4.5”(XH) DP; 80 – 4”(FH) DP
Swivel: Hookload Static w/ 160RPM = 34000kgs w/ 3” ID Top drive: 125-170RPM (6300 – 9500ft/lbs torque) Plus full Pason system set up w/ sidekick
	Mud tanks: 25m3 total volume – Suction 8m3 Settling 7m3 Shaker 6m3 Sand Trap 1.5m3 Trip Tank 2.0m3

DFTS 3 Screen Shaker System

Pump: Oilwell P214Duplex
– 184mm x 356mm x 57mm (Rod Diameter)

Pump Output:

Liner 184mm = 30stks - 1.08m3 / 60stks - 2.16m3
Liner 178mm = 30stks - 1.00m3 / 60 stks - 2..01m3
Liner 171mm = 30stks - 0.93m3 / 60 stks - 1.85m3
Liner 165mm = 30 stks - 0.85m3 / 60 stks - 1.72m3
Liner 159mm = 30 stks - 0.79m3 / 60 stks - 1.59m3
Liner 146mm = 30 stks - 0.66m3 / 60 stks -1.32m3
Liner 140mm = 30 stks – 0.61m3 / 60 stks – 1.19m3